How To Fix SATA drive neither detected in Windows or BIOS or startup


TIP: You should click here to fix Windows errors and optimize system speed.


Seeing an error when you work on your computer is not an instant cause of panic. It is not unusual for a computer to encounter problems but it is also not a reason to let it be and not to investigate on the errors. Windows errors are issues that can be fixed through solutions depending on what may have caused them in the first place. Some may only need a quick fix of re-installation of the system while others may require in-depth technical assistance. It is crucial to react to the signals on your screen and investigate the problem before trying to fix it.

From the Forums

A user in the forum details it further:


I tried booting normally again.. no drive detected, not even the error message!So I tried to plug the hard drive on my desktop computer but it could not be detected in the BIOS and in Windows. Hay!My friend's laptop had a windows file corrupt (Error message before Windows starts about HAL.DLL) so I booted up with Ubuntu to correct that but I could not see the hard drive and could not mount it.



What causes SATA drive neither detected in Windows or BIOS or startup

Whenever you see windows error on your screen, the easiest and safest way to fix it is to reboot your computer. Just like our bodies needing a shut eye for several minutes, our computers also need to shut down once in awhile. A quick reboot can refresh your programs and gives your computer a clean slate to start a new venture. More often than not, it also eliminates the errors you have encountered after rebooting. It is also ideal to shut down your computer once a week to completely put all unused programs to rest. However, when a reboot does not work anymore, use more advanced Windows solutions to fix your errors.

 

More info on SATA drive neither detected in Windows or BIOS or startup


RECOMMENDED: Click here to fix Windows errors and optimize system speed.

Solved: SATA drive detected in BIOS but not visible

I thought that by getting everything back into place, I'd now be able to see the drive since it's partitionated, but no. I'd like to know what step I should take in order to see my hard drive partitions in my hd list in win xp.

I've been trying for the past hours to get a 400GB seagate 7200.10 drive to work in my computer. I've downloaded the SATA drivers directly from asus but got to the problem where the viaraid.sys couldn't be copied.

Like the thread title state, I'm able to see the hard drive at boot time and in the bios though in the system I have no information on it at all. I was able to partition the drive into two parts and almost began install win xp though after the reboot, I was stuck in a loop. The Serial ATA controller was disabled (in the control panel > peripherals > Serial ATA controller)

Drives show up!
 


Solved: Strange - Second SATA Drive Working but Not Detected by BIOS

Now, when in the BIOS setup, it says the second SATA drive is ‘not detected’ and only one is shown as available for the boot priority options. However, when I actually get into XP it shows up and I can access my media perfectly. It had been running perfectly.

I just added a second SATA drive to my system and now I’m getting some headaches booting up.

After adding the 2nd drive the system wouldn’t boot – the BIOS logo screen hung for ages and then I got the message: NTLDR is missing – press ctrl + alt + del to restart. PC: Home build (but working fine until just now)
Processor: AMD Athlon 64 Dual Core 4200+
MBoard: ASUS M2N-MX SE
2 x SATA HD: WD 3200 SD-01KNBO
 




Will anyone here be able to enlighten me as to what is going on?!?!?! However, I CAN boot into XP – but only by going into the BIOS setup and pressing f10 to save and exit.

Then it boots up fine. The HD I added also had 3 partitions, all containing pure media (documents, films, music). Thank you, thank you, thank you!

Maybe because of my limited knowledge – but it all seems quite strange to me…

My first HD was split into 3 partitions: C:Windows, Drogram Files, Eocuments & Settings. But if I merely exit BIOS without saving, it takes me back to the NTLDR message. Boot priority is CD, HD, Disabled.


External Sata Hd detected in windows, not in BIOS

The BIOS does not allow search for additonal hard drives. I have a internal Hitachi 120 gb hd installed. I have looked for BIOS updates that address this problem but have not found any.

If I use a USB cable, the drive is detected in the boot section of the BIOS but will not boot. From what I have read on the internet the USB is too slow to boot, but a sata drive should be capable.

I want to be able to boot my Toshiba Satellite laptop P205D-S7436 using an external sata hard drive using an enclosure connected to an Esata express card. Any sugestions?
 




I don't understand why the esata connected drive is detected in windows, but not in the BIOS. The external hd is a Hitachi 500 gb 2.5 sata hd. The hard drive is detected in windows, but not in the first screen of the BIOS.


ThinkPad T410s - Primary Micro SATA HDD not detected by BIOS - Only Detected By OS Platforms

errors.  I just can't use this as my primary drive anymore because it will not initialize with BIOS.  I am hoping that I do not need to replace the MOBO as they go from $50 - $150 US plus shipping.   OS's used:Win10x64Win7x64WinXPWin98SELinuxMintBT5-R3KaliLinuxUBCD - FreeDOS - LINUXDoss6.22 Any thoughts on this issue would be greatly appreciated




















It sounds like something is timing out.  It is hard to be sure without swapping either the drive or the MB.  You might go into the BIOS and select diagnostic mode for boot.  That would do a memory test and it might slow things down enough to mask the problem




















I have a Lenovo T410s - 29123RU BIOS - V1.5 (6UET70WW) 2012-10-11 - (updated from V1.1 this morning hoping it wold solve the problem)ECV - 1.14MTM - 29123RUCPU - Intel Core i5 M520 @ 2.4GHzRAM - DDR3 - 4GBx2 - PC3-10600s This laptop uses a 250GB - 1.8" Micro Sata HDDTOSHIBA MK2529GSG - 250GB - HDD1F07 M BL02 The other day the laptop was running fine then all of a sudden crashed.  I tried to reeboot and i got -  ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (2)PRESS ESC TO CONTINUE I have run scans on the drive itself using: HD Tune ProHDD RgeneratorCrystalDiskInfoTestDiskUBCD- ViVard v4.0- TAFT v1.2Passmark B...


CD/DVDROM drive - not detected by bios, detected by Windows?

There have been no hardware changes in the past three months, and my current installation and configuration began back in late April. Many computer manufacturers set the computer to automatically boot off of the hard drive by default so setting the factory defaults might not be what you are looking for. Can anyone help me get my bios and cdrom back together again? Once my system boots into Windows, however, the drive is recognized and acts normally as if nothing happened in bios.

What I need, though, is access to the repair function on the disk. I have the latest version of my bios. The problem is I just do not know where to start to solve this. I hope that helps.
 

When I boot up, media in the drive or no media, bios does not show the drive in its list. I can still open and close the drive as if nothing is wrong there, but I cannot "boot from CD". Media operates fine. I've reset my bios back to defaults and while the drive appeared on IDE Channel 1 in the settings, it still would not recognize ANY media while booting up.

I have also tried changing cables. should be CD or optical drive first, then Hard Drive or IDE-0 second if you want to boot from the cd-drive. However, herein lies my problem... The drive is on an IDE channel by itself.

I have checked the event viewer, and there are no entries anywhere that states my optical drive has been experiencing problems, and yes, in fact it operates just like it always...


New SATA Drive not detected in Windows

I have all the latest patches/fixes/upadates and service pack 2 installed. If anyone can help I would greatly appreciate it.
 




SATA needs to be enabled in the bios.
 

The drive shows up in BIOS but when Windows loads up, the drive does not show up in My Computer.

I have an Intel D865GBF mobo with integrated SATA controller ports with all the latest drivers installed. It's also not present in Disk Manager nor Device Manager. What could be the problem?


Sata Drive not detected in Windows

Any ideas?
 




I have a SATA Blu Ray Drive and Windows isn't detecting it, it is detected in the BIOS as is my other SATA DVD drive (which shows up in Windows) I know it has worked and is all connected correctly it just doesn't want to play ball. Now the blu ray drive doesn't, It shows up in the Marvell raid controller but not in Windows, the DVD does but the blu ray doesn't there is power going to it, and I have tried swapping the data leads, no joy. I also plugged the drive in using a USB - SATA cable which worked.

I have a DVD and a Blu Ray drive to start with both optical drives worked fine. I changed the Marvel controller from RAID to AHCI nothing. Edit, there is power to the drive I can open and close it in Windows.
 




This was a new build using an Asus P6X58 board.


Sata Drive Not Detected By Windows 7

any ideas?? Are you connecting the sata2 drive to sata2 drive port on the mobo?



Hey there,

I recently bought two new sata3 drives and set them up in a raid stripe and installed win7, all work fine. but after disconnecting that to try the other drive its now got the same problem.

I had a similar problem with my other sata2 drive but that one showed up in device manager as a 'scsi' and after a few reboots suddenly showed up in disc man. not in disc management or device manager... I added an older sata2 drive, it shows in the bios but Windows 7 cant see the drive..


SATA drive detected as an atapi drive by windows xp setup.

Thank You
I also added a logical partition which has been removed. Out of curiosity I put a windows 98 setup cd. There was a size limitation, it only saw around 35 GB






















Quote:
2nd primary partition is setup as 99.97 GB FAT32


Why FAT32?

Is the boot fix correct? It makes me wonder on SATA drives if windows 98se can be installed onto logical partition. It didn't see the Fat 32 2nd partition but it did see the logical fat 32 partition as a normal dos primary partition. Dual Boot Installation with Windows 7 and XP

SATA Drivers - Load in Windows XP Setup on Dual Boot
SATA Drivers - Slipstream into Windows XP CD

Use EasyBCD 2.0 in Win 7 & Win XP.

EasyBCD - NeoSmart Technologies

I’m wanting to install windows xp for backwards compatible with order programs.

1st primary partition is W7 size is 243.71 GB NTFS maximum it will shrink down.
2nd primary partition is setup as 99.97 GB FAT32 (can expanded space later after installing SP2)

After installing XP,
I will use the windows 7 system boot disk and do the following from the command prompt
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /rebuildbcd

Is it ok to install windows xp, since it sees the drive as an atapi and don't need to worry about the sata driver?

SATA drive detected as an atapi drive by windows xp setup.


2nd int sata detected in bios but not in xp



I have tried several different Sata drives as a 2nd internal drive but none of them are detected in Disk Management or Device Manager. Antivirus, Updated: Yes, On-Demand Scanner: Enabled
 

As an XP system the Sata mode in the bios is set to IDE.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) II X4 630 Processor, x86 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce 6600 GT, 128 Mb
Hard Drives: C: Total - 476937 MB, Free - 402520 MB;
Motherboard: ASRock, K10N78
Antivirus: avast! I have also tried relocating my working Sata from my C drive to one of the other Sata slots but that is also not detected.


SATA HDD not detected by the BIOS



I've got a SATA HDD which is not detected by the BIOS. how about transferring that HDD to a diff computer ., that may be help , if not contact this phone number 8005513917 Data Recovery By CBL - Hard Drive and RAID Recovery
this maybe a bad sectors ..

Is it over or there is software or something that can bring it to life? So basically you cant boot the computer to normal mode right?? It has important data.


SATA HD not detected in BIOS

I had an old 80 Gb IDE drive that I plugged in while I was waiting for the SATA drive and it was working fine, but I want to get the SATA drive back up and running. Any ideas????

Hope somebody can help me out on this one, I disconnected my hard drive to install a chipset fan that had failed on my ASUS A8N-SLI motherboard and when I tried to plug in the harddrive the computer could not detect a hard drive on start up.

I also checked the BIOS settings and noticed that with the drive plugged into SATA port 1 that it was also not detected in BIOS. I tried another SATA cable and another power cable to no avail since the HD, a Seagate Barracuda 7200 300 Gb, was still covererd under warranty, I sent it in and received a repaired HD. When I plugged it in I got the same problem, no disk detected on start up and BIOS.


Bios SATA 1 device not detected

I know the hard drive is spinning because I could hear it. I went into Bios (v02.61) American Megatrends and the SATA 1 device was not detected. I wasent tampering with anything it just randomly came up with this message. BIOS is not detecting my hard drive for some reason.

It detetcs my DVD player in SATA 2 but every other SATA slot is empty. There was also some message regarding express gate but I dont know if thats part of this problem. Hey I just bought a new computer recently and having some problems.

I tried to make sure the wires were in correctly and they were but that didnt solve my problem. It was working fine and then I shut it down and then it came up the the error "reboot and select proper boot device".


SATA hardisk detected as IDE in BIOS. Please help

I am trying to install new WD SATA hard disk in my dektop . Disk Management - Post a Screen Capture Image

Maybe Win7 is not recognizing it yet if it is not initialized or formated.

Can you do a Disk Management screen snip ? But Bios recognized as IDE. So its not properly detecting in System.

Friends,
I need your help to resolve this issue.

Here is my cofiguration

Motherboard - ASRock -Wolfdale1333-D667
IDE - 80 GB Samsung - Master - windows 7 installed
IDE - DVD writer - Slave

My new wd SATA hardisk model - WD5000AAKX - WD Blue / SE / SE16 (SATA II) -500 GB

What i already did:

Checked with another data cable to detect HD correctly
Tried all SATA port on my mobo
Set Enhanced option on BIOS
Please please someone help me.


SATA Not detected in Bios-CDROM and HDD

I will need steering round the Bios because I tried searching for SATA controller to enable and couldnt find it nor it anywhere mentioning RAID to fiddle around with.

I replaced my motherboard today with an Asus P5KPL SE because my computer refused to boot at all (no beeps, nothing). All suggestions welcome because I am at a dead end.
 




Anyway I plug it all in and start the PC up but am quickly led to a screen telling me:

"Reboot and Select proper Boot device or Insert Boot Meia in selected Boot device and press a key"

This was a problem so I popped into the Bios and quickly saw that no sata devices were detected at all (which is my HDD and CDROM).

I would presume a HDD failure as its a seagate.11 drive but the fact that the CDROM is not detected either seems to indicate a problem within Bios perhaps. Any idea what the problem could be?


Sata AHCI Inf for XP not detected & BIOS

Go to Solution. Other folders have x64 and Vista drives. (I'm assuming that "All" means previous OSs)* BIOS version:  06CN30WW (I have not updated the BIOS as I think this BIOS is newer. Very strange.Try integrating this universal AHCI driver that I usually use to integrate drivers. As I don't want to loose AHCI features, I have integrated the drivers on my XP Pro CD with nLite.

Solved! What could it be?* I integrated the folder "All" present in the downloaded file. After install remember to install Lenovo driver.





//help will save the world












I integrated the Inf files according to the FAQs of this support forum.XP installer does not detect any hard drive.


DVD Drive detected by BIOS but not Windows

Not worth the hassle of trying to make an old PATA drive work, regardless of how much it initially cost. That may make it work.

Decided to install an aftermarket DVD drive from my old pc. Any help in resolving this matter is appreciated.

After the BIOS screen it pulls up a JMicron screen that displays the drive name in green lettering. I would just buy another SATA drive but don't see the need when I know this one is functional. (plus it cost me 3x the amount of my Asus SATA drive)

















New SATA CD/DVD burner drives are cheap. It powers on and the tray works. On the other hand, There may be some driver needed to make the PATA controller active in Windows.

http://www.newegg.com/Product/Produc...82E16827151256

But, the PATA drive, being the only PATA device should be set (jumper on the rear of the drive) for Master. I've tried making adjustments in the registry, disconnecting and reconnecting the drive and all jumper options (Master,Slave,Cable Select). It's the only IDE drive that is connected to my motherboard.

If it won't work set as Master, set it as Cable Select (labled CS or CSEL on drive). Newegg sells them for under $20. It shows up in BIOS under boot device priority but can't be found once I log into windows. The DVD Drive in question is a Pioneer model DVR-A18M.


dvd drive not detected in windows xp or bios


Pentium 4 2.8ghz 1 gig ram.Purchased this tower from ebay, turned it on to find the dvd drive is not showing in my computer.checked in device manager and not there. I have no idea what this is or if it has anything to do with the dvd drive.The drive is LG GH22NS50 Black Dual Layer DVD?RW Writer Please help!!!! So I checked in the bios not detected.

Try a different cable, plugged into a different port on the motherbaord.Also check that the jumpers don't need setting (unusual if they did on a SATA drive, but no unheard of).
Had a look on the techy forums and the general conclusion was a dead dvd drive.so purchased the lg dvd drive and all that happened when I installed it was raid controller appeared in device manager under other devices with a yellow question mark. Checked all the connections nothing happening.


DVD Drive detected by windows but not buy BIOS

That doesn't seem possible.
 

Any ideas?
 



Look again.

Ive recently installing a DVD drive (Pioneer DVD-ROM DVD-104) into a mates PC.

Windows detects the drive fine - read DVDs etc but when I enter the BIOS (Intel Corporation D865GLC) it fails to detect it.


ThinkCentre M910q M.2 SATA SSD Not Detected by BIOS

I'm trying to clone an existing OS on an NVMe M.2 SSD to an M.2 SATA SSD (Lenovo PN 00JT082), it appears to reimage successfully to the drive which is showing in the software. Wondering if it is the same with the M910 desktop. However, the drive isn't showing up as a boot option in the BIOS and I can't boot from the SSD. Am I correct in this case, does it not support bootable M.2 SATA drives?

So then I tried reinstalling Windows 10 fresh on it, and it looks like it installed ok and does appear in Windows installation media, but again, can't boot from it. Now, I did read on a forum topic for (I think) a M710, that it only supports NVMe drives and not M.2 SATA.



LATEST TIP: You should click here to fix Windows errors and optimize system speed.



Recommended Links:

(1) Download (SATA drive neither detected in Windows or BIOS or startup) repair utility.

(2) SATA drive neither detected in Windows or BIOS or startup

(3) Solved: SATA drive detected in BIOS but not visible

(4) Solved: Strange - Second SATA Drive Working but Not Detected by BIOS

(5) External Sata Hd detected in windows, not in BIOS

 
Note: Manual troubleshooting of SATA drive neither detected in Windows or BIOS or startup is only recommended for advanced computer users.Download this automatic repair tool instead.