How To Fix SATA hardisk detected as IDE in BIOS. Please help
SATA hardisk detected as IDE in BIOS. Please help is the name of the error that contains information about the error, including the reason why it occurred, which system component or application was malfunctioning that caused the error, and other information. The numerical code in the name of the error contains data that can be decoded by the manufacturer of the faulty component or application. An error using this code can occur in many different places in the system. Although the name contains some details, it is still difficult for the user to find and eliminate the cause of the error without specialized technical knowledge or the appropriate software.
From the Forums
A user in the forum details it further:
I am trying to install new WD SATA hard disk in my dektop . Disk Management - Post a Screen Capture Image Maybe Win7 is not recognizing it yet if it is not initialized or formated.
Can you do a Disk Management screen snip ? But Bios recognized as IDE. So its not properly detecting in System. Friends, I need your help to resolve this issue.
Here is my cofiguration Motherboard - ASRock -Wolfdale1333-D667 IDE - 80 GB Samsung - Master - windows 7 installed IDE - DVD writer - Slave My new wd SATA hardisk model - WD5000AAKX - WD Blue / SE / SE16 (SATA II) -500 GB What i already did: Checked with another data cable to detect HD correctly Tried all SATA port on my mobo Set Enhanced option on BIOS Please please someone help me.
What causes SATA hardisk detected as IDE in BIOS. Please help
If you received this error on your PC, it means that there is a malfunction in your system. Common causes are incorrect or unsuccessful installation or removal of software that could leave invalid entries in the Windows registry, the effects of a virus or malware attack, an incorrect system shutdown due to a power failure, or another factor in which a person with little technical knowledge accidentally deletes the required A system file or registry entry, as well as several other reasons. The immediate cause of "SATA hardisk detected as IDE in BIOS. Please help" is a failure when one of its normal operations is properly started by a system or application component.
More info on SATA hardisk detected as IDE in BIOS. Please help
RECOMMENDED: Click here to fix Windows errors and optimize system speed.
SATA hardisk cannot be detected by the system
I always refer to it as simply a pig - wonderful when it is set up correctly and working but really difficult when not.
I used to be SAP certified but the company I was with went into liquidation. It can be turned off by odd things.
Also look in the bios and make sure sata is enabled. it is almost as if the cables have not fully seated in the sockets so try that.
ThinkPad T410s - Primary Micro SATA HDD not detected by BIOS - Only Detected By OS Platforms
errors. I just can't use this as my primary drive anymore because it will not initialize with BIOS. I am hoping that I do not need to replace the MOBO as they go from $50 - $150 US plus shipping. OS's used:Win10x64Win7x64WinXPWin98SELinuxMintBT5-R3KaliLinuxUBCD - FreeDOS - LINUXDoss6.22 Any thoughts on this issue would be greatly appreciated
It sounds like something is timing out. It is hard to be sure without swapping either the drive or the MB. You might go into the BIOS and select diagnostic mode for boot. That would do a memory test and it might slow things down enough to mask the problem
I have a Lenovo T410s - 29123RU BIOS - V1.5 (6UET70WW) 2012-10-11 - (updated from V1.1 this morning hoping it wold solve the problem)ECV - 1.14MTM - 29123RUCPU - Intel Core i5 M520 @ 2.4GHzRAM - DDR3 - 4GBx2 - PC3-10600s This laptop uses a 250GB - 1.8" Micro Sata HDDTOSHIBA MK2529GSG - 250GB - HDD1F07 M BL02 The other day the laptop was running fine then all of a sudden crashed. I tried to reeboot and i got - ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (2)PRESS ESC TO CONTINUE I have run scans on the drive itself using: HD Tune ProHDD RgeneratorCrystalDiskInfoTestDiskUBCD- ViVard v4.0- TAFT v1.2Passmark B...
SATA HDD not detected by the BIOS
I've got a SATA HDD which is not detected by the BIOS. how about transferring that HDD to a diff computer ., that may be help , if not contact this phone number 8005513917 Data Recovery By CBL - Hard Drive and RAID Recovery
this maybe a bad sectors ..
Is it over or there is software or something that can bring it to life? So basically you cant boot the computer to normal mode right?? It has important data.
SATA HD not detected in BIOS
I had an old 80 Gb IDE drive that I plugged in while I was waiting for the SATA drive and it was working fine, but I want to get the SATA drive back up and running. Any ideas????
Hope somebody can help me out on this one, I disconnected my hard drive to install a chipset fan that had failed on my ASUS A8N-SLI motherboard and when I tried to plug in the harddrive the computer could not detect a hard drive on start up.
I also checked the BIOS settings and noticed that with the drive plugged into SATA port 1 that it was also not detected in BIOS. I tried another SATA cable and another power cable to no avail since the HD, a Seagate Barracuda 7200 300 Gb, was still covererd under warranty, I sent it in and received a repaired HD. When I plugged it in I got the same problem, no disk detected on start up and BIOS.
2nd int sata detected in bios but not in xp
I have tried several different Sata drives as a 2nd internal drive but none of them are detected in Disk Management or Device Manager. Antivirus, Updated: Yes, On-Demand Scanner: Enabled
As an XP system the Sata mode in the bios is set to IDE.
Tech Support Guy System Info Utility version 220.127.116.11
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) II X4 630 Processor, x86 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce 6600 GT, 128 Mb
Hard Drives: C: Total - 476937 MB, Free - 402520 MB;
Motherboard: ASRock, K10N78
Antivirus: avast! I have also tried relocating my working Sata from my C drive to one of the other Sata slots but that is also not detected.
Sata AHCI Inf for XP not detected & BIOS
Go to Solution. Other folders have x64 and Vista drives. (I'm assuming that "All" means previous OSs)* BIOS version: 06CN30WW (I have not updated the BIOS as I think this BIOS is newer. Very strange.Try integrating this universal AHCI driver that I usually use to integrate drivers. As I don't want to loose AHCI features, I have integrated the drivers on my XP Pro CD with nLite.
Solved! What could it be?* I integrated the folder "All" present in the downloaded file. After install remember to install Lenovo driver.
//help will save the world
I integrated the Inf files according to the FAQs of this support forum.XP installer does not detect any hard drive.
Bios SATA 1 device not detected
I know the hard drive is spinning because I could hear it. I went into Bios (v02.61) American Megatrends and the SATA 1 device was not detected. I wasent tampering with anything it just randomly came up with this message. BIOS is not detecting my hard drive for some reason.
It detetcs my DVD player in SATA 2 but every other SATA slot is empty. There was also some message regarding express gate but I dont know if thats part of this problem. Hey I just bought a new computer recently and having some problems.
I tried to make sure the wires were in correctly and they were but that didnt solve my problem. It was working fine and then I shut it down and then it came up the the error "reboot and select proper boot device".
SATA Not detected in Bios-CDROM and HDD
I will need steering round the Bios because I tried searching for SATA controller to enable and couldnt find it nor it anywhere mentioning RAID to fiddle around with.
I replaced my motherboard today with an Asus P5KPL SE because my computer refused to boot at all (no beeps, nothing). All suggestions welcome because I am at a dead end.
Anyway I plug it all in and start the PC up but am quickly led to a screen telling me:
"Reboot and Select proper Boot device or Insert Boot Meia in selected Boot device and press a key"
This was a problem so I popped into the Bios and quickly saw that no sata devices were detected at all (which is my HDD and CDROM).
I would presume a HDD failure as its a seagate.11 drive but the fact that the CDROM is not detected either seems to indicate a problem within Bios perhaps. Any idea what the problem could be?
Maxtor SATA HDD not detected in ASUS BIOS
I know I had to change something in the BIOS and install the raid controller from the floppy that came with my motherboard. XP detected it and I copied all my movies, pics etc onto it. Please can a anyone help?
Graham B, welcome to TSG
What does device manager say? any yellow or red problems?
So go explore the BIOS and see what you can find, enable any and all sata raid options, if that fails tell me what you did or didn't do and I will try and help
I wish to install a Maxtor 6L150S 233GB HDD via a SATA connection. I have enabled SATA in the BIOS but still no joy. I have the same board and I think i had problems at first and can not remember what I did Grrrr.
I have a Samsung IDE HDD which isrunning Visat 32 bit fine. When I connect the Maxtor into the HTPC it is not detected in BIOS. To speed the transfer of files from my main desktop pc onto this HTPC I installed the Maxtor into my Dell Dimension 5150 using the SATA connection.
External Sata Hd detected in windows, not in BIOS
The BIOS does not allow search for additonal hard drives. I have a internal Hitachi 120 gb hd installed. I have looked for BIOS updates that address this problem but have not found any.
If I use a USB cable, the drive is detected in the boot section of the BIOS but will not boot. From what I have read on the internet the USB is too slow to boot, but a sata drive should be capable.
I want to be able to boot my Toshiba Satellite laptop P205D-S7436 using an external sata hard drive using an enclosure connected to an Esata express card. Any sugestions?
I don't understand why the esata connected drive is detected in windows, but not in the BIOS. The external hd is a Hitachi 500 gb 2.5 sata hd. The hard drive is detected in windows, but not in the first screen of the BIOS.
ThinkCentre M910q M.2 SATA SSD Not Detected by BIOS
I'm trying to clone an existing OS on an NVMe M.2 SSD to an M.2 SATA SSD (Lenovo PN 00JT082), it appears to reimage successfully to the drive which is showing in the software. Wondering if it is the same with the M910 desktop. However, the drive isn't showing up as a boot option in the BIOS and I can't boot from the SSD. Am I correct in this case, does it not support bootable M.2 SATA drives?
So then I tried reinstalling Windows 10 fresh on it, and it looks like it installed ok and does appear in Windows installation media, but again, can't boot from it. Now, I did read on a forum topic for (I think) a M710, that it only supports NVMe drives and not M.2 SATA.
H50-50 - controller sata/raid non detected in bios
in my lenovo H50-50 (windows10 64bit) i installed a new ams106x sata/raid PCI-Express controller and correctly configured as raid1 but i can not any way to make it detected by the bios in the boot device. Is there a way to make it detected by the bios and boot the system from the controller Raid? Welcome to the Lenovo Community !
I am not an owner of your model, but I have a suggestion. Is there an option in the BIOS for Quick Boot or Fast Boot. If so, try disabling if enabled. The slower boot sequence might detect the card so that its BIOS can be loaded.
Hardisk not detected in XP but in 7
no error report during boot. Here are the details.
* Hard Disks:
- Primary master : Maxtor 40 GB 2F040J0
-Secondary Slave: Samsung 80 GB
-Secondary Master: Pioneer DVD-RW
-Secondary Slave: Maxtor 40 GB.2F040J0
Its a P4 2.8Ghz system with a 478-ASRock board. I booted and installed 7 on that disk. Any suggestions plzz
In Disk Management on Windows XP theres even no sign of the secondary slave maxtor HDD. Windows XP SP3 is installed on the primary master maxtor 40GB. It is dected on widows 7.
The one you see when the computer boots up. BioS shows all hard disks. One weird thing I noticed is that the two 40 GB Maxtors had the same ID. Well im kinda stuck with a detection problem of one IDE harddisk (secondary slave connected) on my pc.
hardisk not detected
Did you go into the repair tools to run the Startup repair tool? Once the XP install is detected the boot information will be rewritten where you then see the "boot sector written successfully" type message.
I had 3 hard drive installed on my computer:
1. Dual Boot Installation with Windows 7 and XP
If XP was a stand alone install where the boot files for XP are on the 160gb you should be able to boot into XP without further problem. Then you boot from the XP install cd and press the R for Recovery Console option to reach the command prompt type window where you enter the "Fixmbr" and "Fixboot" commands after typing "scan OS". The XP drive was then made unbootable where now you would need to unplug both the 40gb ide drive like it sounds as well as the 250gb drive 7 was installed to. Since IDE will be seen first by any Windows repair tool or installer taking priority over sata that would need to be unplugged.
After I connect my HD 250 gb (so all my 3 hardisk connected), my HD 160 GB then can be recognize again. I can not get in XP, I boot from dvd rom to install Win 7, but my hard drive just recognized ata 40 GB HD (note: HD 250 GB I unplug the cord), so there are only 40 gb HD and HD 160 GB. If the XP drive proceeds the 7 drive as far as which sata port the drive is plugged into the repair tool may have replaced the XP mbr entries. My question is why in condition HD 250 gb unplug the cord the computer does not...
New SATA drives recognised by BIOS but not detected by Vista
They are picked up in the BIOS just fine, but Vista can't see them.
What it says on the tin, really. Everything that should be enabled is enabled.
I should stress that this is NOT a RAID setup - I just want two extra HDs. Please, help needed on making Vista detect these drives
I installed two new Maxtor 250GB SATA drives this afternoon, as companions to my 500GB main C:/ drive. It's an MSI K9N Mainboard.
They don't show up in Disk Management or the Device Manager, so I can't format them or do anything with them. I've looked through the manual and the BIOS very thoroughly, but I can't find anything wrong.
Solved: SATA drive detected in BIOS but not visible
I thought that by getting everything back into place, I'd now be able to see the drive since it's partitionated, but no. I'd like to know what step I should take in order to see my hard drive partitions in my hd list in win xp.
I've been trying for the past hours to get a 400GB seagate 7200.10 drive to work in my computer. I've downloaded the SATA drivers directly from asus but got to the problem where the viaraid.sys couldn't be copied.
Like the thread title state, I'm able to see the hard drive at boot time and in the bios though in the system I have no information on it at all. I was able to partition the drive into two parts and almost began install win xp though after the reboot, I was stuck in a loop. The Serial ATA controller was disabled (in the control panel > peripherals > Serial ATA controller)
Drives show up!
SATA drive neither detected in Windows or BIOS or startup
I tried booting normally again.. no drive detected, not even the error message!So I tried to plug the hard drive on my desktop computer but it could not be detected in the BIOS and in Windows. Hay!My friend's laptop had a windows file corrupt (Error message before Windows starts about HAL.DLL) so I booted up with Ubuntu to correct that but I could not see the hard drive and could not mount it.
Solved: Hardisk Cannot Be Detected?
help me..My problem is..My New buy HDD, Cannot be detected on my Motherboard., But if i try to other board, it' can be detected..My board is Asus P5kpl-am Se, 5 months used..help me..thank you..
check in bios i was having this issue this week on a dell it just would not resognise it so eventually bios setting was found and a second HDD was not enabled all ok now
when in bios you can usually auto detect for HDDs thats your starting point really, the actual settings
Solved: Strange - Second SATA Drive Working but Not Detected by BIOS
Now, when in the BIOS setup, it says the second SATA drive is ‘not detected’ and only one is shown as available for the boot priority options. However, when I actually get into XP it shows up and I can access my media perfectly. It had been running perfectly.
I just added a second SATA drive to my system and now I’m getting some headaches booting up.
After adding the 2nd drive the system wouldn’t boot – the BIOS logo screen hung for ages and then I got the message: NTLDR is missing – press ctrl + alt + del to restart. PC: Home build (but working fine until just now)
Processor: AMD Athlon 64 Dual Core 4200+
MBoard: ASUS M2N-MX SE
2 x SATA HD: WD 3200 SD-01KNBO
Will anyone here be able to enlighten me as to what is going on?!?!?! However, I CAN boot into XP – but only by going into the BIOS setup and pressing f10 to save and exit.
Then it boots up fine. The HD I added also had 3 partitions, all containing pure media (documents, films, music). Thank you, thank you, thank you!
Maybe because of my limited knowledge – but it all seems quite strange to me…
My first HD was split into 3 partitions: C:Windows, Drogram Files, Eocuments & Settings. But if I merely exit BIOS without saving, it takes me back to the NTLDR message. Boot priority is CD, HD, Disabled.
Solved: SATA III not detected in bios Asus P6X58D Premium
Is there a way to get the drive to work at 6 Gb/s? Is there any advantage? Also, grab the motherboard manual as well and see what settings should be enabled for the Marvell controller to work and how to enable AHCI on it: http://www.asus.com/Motherboards/Intel_Socket_1366/P6X58D_Premium/#download
The 6Gbs ports on your motherboard are provided by an additional Marvell controller, therefor they should not show up in the BIOS but in the Marvell ROM that loads after the initial BIOS.
However, when I connect to a SATA 3.0 Gb/s interface the drive works fine. The Marvell controller also needs to be enabled in the BIOS, and it may be disabled. My build includes
Tech Support Guy System Info Utility version 18.104.22.168
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 8183 Mb
Graphics Card: ATI Radeon HD 4670 (Microsoft Corporation WDDM 1.1), 1024 Mb
Hard Drives: C: Total - 1907626 MB, Free - 1883943 MB; D: Total - 99 MB, Free - 70 MB; E: Total - 1907599 MB, Free - 17 MB; F: Total - 615058 MB, Free - 10905 MB; G: Total - 100241 MB, Free - 4105 MB; I: Total - 476898 MB, Free - 7309 MB;
Motherboard: ASUSTeK Computer INC., P6X58D PREMIUM
(this is still an ongoing clean re-install so av didn't show yet)
Only the burst speed will increase going to SATA 6Gbs, sequential read and write speeds do not exceed SATA 3Gbs speed...