How To Fix Windows activation providing error code 0x80070005 (Access is denied)


TIP: You should click here to fix Windows errors and optimize system speed.


A mistake or inaccuracy, an error is caused about by committing miscalculations on the things that you do. It is a state of having a wrong judgement or conception in your conduct that allows catastrophic things to happen. In machines, error is a way to measure the difference between the observed value or the computed value of an event against its real value.

It is a deviation from correctness and accuracy. When errors occur, machines crash, computers freeze and softwares stop working. Errors are mostly unintentional events to happen. Most of the time, errors are a result of poor management and preparation.

Seeing an error when you work on your computer is not an instant cause of panic. It is not unusual for a computer to encounter problems but it is also not a reason to let it be and not to investigate on the errors. Windows errors are issues that can be fixed through solutions depending on what may have caused them in the first place. Some may only need a quick fix of re-installation of the system while others may require in-depth technical assistance. It is crucial to react to the signals on your screen and investigate the problem before trying to fix it.

Having a sign that tells us of issues that we need to solve in life for us to move forward is a great idea. While it does not always work in life, it does in computers. Messages that indicate the issues your computer encounters are called error codes. They appear whenever there is a problem such as incorrect data input or faulty hardware. Computer programmers add predefined error codes and messages in their system codes so whenever there is an issue, it prompts the users. While error codes may be predefined, there are different sets of error codes with different meanings for other kinds of computer programs.

From the Forums

A user in the forum details it further:


Error: 0xC004F012 Windows Activation Technologies--> HrOffline: 0x00000000 HrOnline: 0x00000000 HealthStatus: 0x0000000000000000 Event Time Stamp: 10:10:2015 17:24 ActiveX: Registered, Version: 7.1.7600.16395 Admin Service: Registered, Version: 7.1.7600.16395 HealthStatus Bitmask Output: HWID Data--> N/A, hr = 0x8007000d OEM Activation 1.0 Data--> N/A OEM Activation 2.0 Data--> BIOS valid for OA 2.0: yes Windows marker version: 0x20001 OEMID and OEMTableID Consistent: yes BIOS Information: ACPI Table Name OEMID Value OEMTableID Value APIC HPQOEM SLIC-CPC FACP HPQOEM SLIC-CPC HPET HPQOEM SLIC-CPC MCFG HPQOEM SLIC-CPC OEMB HPQOEM SLIC-CPC INFO HPQOEM SLIC-CPC NVHD HPQOEM SLIC-CPC SLIC HPQOEM SLIC-CPC SSDT HPQOEM SLIC-CPC I have been fixing up a computer which was loaded with malware/viruses. My thought here is that there is still some rootkit or rogue malware running which is preventing me access to this file. It is preventing access to other system files such as the hosts file, the ability to start/stop services through the services.msc console, etc.

Couple of things I have tried to resolve this: - Microsoft support KB article 2008385 = https://support.microsoft.com/en-us/kb/2008385 - Disabled Plug N Play service within registry through CMD command - Enabled Administrator account to attempt activation After attempting these steps and performing a reboot, I am still unable to get around this unusual activation error. So I am having a rather unusual issue here.... Please help! Also provided is my MGADiag results from the infected system: Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation Data--> Validation Code: 50 Cached Online Validation Code: 0x0 Windows Product Key: *****-*****-73CQT-WMF7J-3Q6C9 Windows Product Key Hash: KaFG+RmurcM3ZxzWyfEP9WtPUJw= Windows Product ID: 00359-OEM-8992687-00010 Windows Product ID Type: 2 Windows License Type: OEM SLP Windows OS version: 6.1.7601.2.00010300.1.0.003 ID: {51482646-6E61-4A0A-B81F-423BF58A8C0F}(3) Is Admin: Yes TestCab: 0x0 LegitcheckControl ActiveX: N/A, hr = 0x80070002 Signed By: N/A, hr = 0x80070002 Product Name: Windows 7 Home Premium Architecture: 0x00000009 Build lab: 7601.win7sp1_gdr.151019-1254 TTS Error: Validation Diagnostic: Resolution Status: N/A Vista WgaER Data--> ThreatID(s): N/A, hr = 0x80070002 Version: N/A, hr = 0x80070002 Windows XP Notifications Data--> Cached Result: N/A, hr = 0x80070002 File Exists: No Version: N/A, hr = 0x80070002 WgaTray.exe Signed By: N/A, hr = 0x80070002 WgaLogon.dll Signed By: N/A, hr = 0x80070002 OGA Notifications Data--> Cached Result: N/A, hr = 0x80070002 Version: N/A, hr = 0x80070002 OGAExec.exe Signed By: N/A, hr = 0x80070002 OGAAddin.dll Signed By: N/A, hr = 0x80070002 OGA Data--> Office Status: 109 N/A OGA Version: N/A, 0x80070002 Signed By: N/A, hr = 0x80070002 Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3 Browser Data--> Proxy settings: N/A User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32) Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe Download signed ActiveX controls: Prompt Download unsigned ActiveX controls: Disabled Run ActiveX controls and plug-ins: Allowed Initialize and script ActiveX controls not marked as safe: Disabled Allow scripting of Internet Explorer Webbrowser control: Disabled Active scripting: Allowed Script ActiveX controls marked as safe for scripting: Allowed File Scan Data--> Other data--> Office Details: <GenuineResults><MachineData><UGUID>{51482646-6E61-4A0A-B81F-423BF58A8C0F}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-3Q6C9</PKey><PID>00359-OEM-8992687-00010</PID><PIDType>2</PIDType><SID>S-1-5-21-531353185-1000728662-116016096</SID><SYSTEM><Manufacturer>HP-Pavilion</Manufacturer><Model>AY633AA-ABA p6313w</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>5.14 </Version><SMBIOSVersion major="2" minor="5"/><Date>20100119000000.000000+000</Date></BIOS><HWID>1B583E07018400F4</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-CPC</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> Spsys.log Content: 0x80070002 Licensing Data--> On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a 0xC004F012' to display the error text.

I have run the below software programs to help clean up the system: - Malwarebytes Anti-Malware - Super Anti-Spyware - HiJack This After cleaning it up, I am running into one additional issue which is flagging my system as not being genuine The system was purchased with a valid license key for Windows 7 Home Premium 64-bit.



What causes Windows activation providing error code 0x80070005 (Access is denied)

Whenever you see windows error on your screen, the easiest and safest way to fix it is to reboot your computer. Just like our bodies needing a shut eye for several minutes, our computers also need to shut down once in awhile. A quick reboot can refresh your programs and gives your computer a clean slate to start a new venture. More often than not, it also eliminates the errors you have encountered after rebooting. It is also ideal to shut down your computer once a week to completely put all unused programs to rest. However, when a reboot does not work anymore, use more advanced Windows solutions to fix your errors.

 

More info on Windows activation providing error code 0x80070005 (Access is denied)


RECOMMENDED: Click here to fix Windows errors and optimize system speed.

activation windows 7 ultimate error code 0x80070005

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-GJY49-VJBQ7-HYRR2
Windows Product Key Hash: W5/6nm6F2UPXrCkY5xUhXb/+21g=
Windows Product ID: 00426-OEM-8992662-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {5432B070-7247-4F64-87BC-9284A4DDA2C5}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.130708-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 103 Blocked VLK
Microsoft Office Enterprise 2007 - 103 Blocked VLK
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-800410...


windows start-up error re: windows product activation. error code 0x80070005

some guys have 'similar problems' but not quite the same until i find this one: http://www.computerhope.com/forum/index.php?topic=73401.0i've followed the steps listed there and was starting to feel a bit confident but now its 4am and its been hours now and still haven't had any joy!!slight differences exist between my prob and the other post. J just call microsoft. grrrrr!. righto.ive been running xp on this computer for about 3 or 4 years with no problems.

hmmm so i try safe mode with networking. i have rung the for the same problem they can activate it on their end..hang on ahhh start up hmmm might be a bit differt but id ring. i went away for a year and didn't use it. i do directory assistance usually has the number or get it off the web site advice for such problems is free.

the computer was then left for 2 days until i tried to restart it yesterday. all is ok. so i get back and i figure i'll update all the virus checkers and what-not. i can put up some screenshots if it would be any help to anyone.

that's all good so i do some browsing online. and suggested i completely uninstall and reinstall the new one, so i did....i thought this xp thing would be a simple one but it's all going a bit wrong! no joy i get this message before any icons or the startup apps get rolling:windows product activationa problem is preventing windows from accurately checking the license for this computer. on that board reply #7 is d...


ipersistfile :: save failed code 0x80070005 access is denied

Could anyone help me out please




While trying to install ConvertXtoDVD I got this message near the end of the installation and the software will not work because of it

I've ran sfc /scannow and I ran it in safe mode, it said it fixed files but I still get the error
I've ran DISM which said there was nothing wrong

I've ran a scan with Malware Bytes a few times and have removed malware

The profile I am using is an adminstrators

I don't know what else to try...


Error 0x80070005 ; Access is denied

What do i have to do?? I Want to share files with my brother but everytime
i try to do it it is not possible, Access is denied (Error 0x80070005). Turned AVG off.

Do you both have admin rights for your user profiles?

I already enabled File Sharing, etc.


error 0x80070005: access denied



I'm getting this error when I try to backup on an external usb hard drive. Any help would be appreciated. I can access the drive via explorer and copy/delete files so I'm confused why the backup program craps out.

I've been doing this for months and this problem just began - I'm using Vista sp1.


Access denied - error 0x80070005

For one mapped network drive, I do get prompted for credentials, however, no matter what I log in with (myself, which is an administrator account, or the administrator account) I get a message saying "Multiple Connections to a server or a shared resource by the same user, using more than one user name, are not allowed. However, starting today I am no longer able to access the network or server at all, even by manually browsing to the server using \\sbs1. When trying to manually browse to a network drive or the server, I get the error message #0x80070005 saying that Windows cannot access \\sbs1, etc. When I try accessing mapped networked drives, instead of being prompted for log-on credentials I get an "Access denied" message.


I have a laptop running Vista home premium in a network environment. I have a couple of mapped network drives that I would just have to provide network log-on credentials to access. I tried a System Restore to last week before this started occurring to no avail. Server is running Small Business Server 2003.

Disconnect all previous connections to this resource and try again." I'm puzzled why I have had no problems for almost three years until today out of nowhere. I can ping the server from a command prompt without problem. For almost 3 years I have been able to utilize this machine on the network despite it being a home edition. Any suggestions would be much appreciated.


Back up error access is denied. (0x80070005)

Click Properties.
4. Click Start, and then click Windows Explorer.
2. Can someone please help me resolve this error. The following information might helo you resolve the error.

Method 2

1. An error occurred. Access is denied. (0x80070005). The Cmd.exe file is located in the %windir%\System32 folder.
3.

reboot and try backing up again

If your still having issues please post back

regards




Craig
Locate and then right-click the Cmd.exe file. Click Yes when you are prompted to continue. Click the Security tab.
5.

Click Start, and then click Windows Explorer.
2. Click Yes when you are prompted to continue.

I have been trying to back up my files using the microsoft backup tools and I keep getting an error message that says backup did not complete successfully.

Click Add.
6. In the Enter the object names to select box, type Batch, and then click OK two times.
7. Locate and then right-click the Cmd.exe file. Click the Security tab.
5.

The Cmd.exe file is located in the %windir%\System32 folder.
3. To do this, follow these steps:

Method 1

1. Click Add.
6. Click Properties.
4.

In the Enter the object names to select box, type the user name that the batch job runs under, and then click OK two times.
7.


Access Denied Error message 0X80070005



I am about to format my hard drive using the Window7 installation disk. It seems to indicate "Access denied"

Does anybody have an idea how to get rid of this message ? After inserting the Windows 7 DVD and running I get the above error message,
and the installation stops.

AntonABC
 


Error 0x80070005, Access Denied -- Need help ASAP

Double click the Windows Modules Installer service name to set its startup type to Manual.
 
3. Access is denied."
 
Tried a number of solutions I found on Google and Microsoft's website, including checking system services, turning off Avira temporarily, taking ownership of the external hard drive, running backup as administrator, and extending the drive partition to include some unallocated space at the top of the disk, but none of this worked. Check the Event Viewer for any error or warning logs that may give you clue what is causing the issue.
 
5. Open Command Prompt as a administrator and type Sfc /Scannow command and press Enter key to repair any damage Windows system files.
 
 
In case you are unable to start the System File Checker and you instead get the “Windows Resource Protection Could Not Start the Repair Service” error, you may want to check up if Windows Modules Installer service has been Disabled.

The startup type of this service should be set to Manual. I get the "Error code 0x80070005. I need help ASAP as the free upgrade is no longer available after July 29th...help!! I still got the error.
 
Next, I tried AOMEI's free backup software, but it could not detect my operating system drive!

In fact, it said I have 46GB of unallocated space in the middle of my Windows partition, which is weird because that doesn't show up in any other software...
Okay, so I can't ever remember having this problem be...


Access Denied Error 0x80070005 under WinXP

I'm always asked for the password, but if I use the password or not I always receive the same message as following:

**An error has occurred while attempting to set task account information**
The Specific Error Is "access has been denied 0x80070005"
You do not have permission to perform the requested operation

Can anybody help me with the answer please?

Dear All

When I try to setup my computer with schedule tasks, I setup the "time" and "Day" and then click OK at this stage. Please don?t forget to set the admin rights to the new user account.

If not, try to login to OS with the new user account and try again.


schedule task error 0x80070005: access is denied

I do not remember the error number but, since is a schedule, did you check your system clock?
 

I am running windows XO home SP2. and both Dell and Microsoft want money to fix their problem..can anyone out there help me?
 




I had that problem. Try using the Task page Browse button to locate application.

The specific error is: 0x80070005: Access is denied. After trying to run the wizard in task scheduler, I get the error message: The new task has been created, but may not run because the account information could not be set. I ahve been to Microsoft's web page, they are aware of the problem, the walk around doesn't work.




I ahve recently just tryed to schedule a few applications to run at certain times. (Norton, adaware, spyware) just to name a few.


backup failed! "Access Denied 0x80070005" error

This is the directory that always pops up: file:\Device\HarddiskVolumeShadowCopy61\Users\cjlanc\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\55\63ca7fb7-144752c8 It's driving me insane. I'm the administrator, no other user accounts on this laptop, so I don't understand why I don't have access to all my files as the error says. Microsoft Security Essentials pops up and tells me that it caught a Trojan (Karagany.G) lurking in one of the shadow copy files.

Some help please?




I've tried to create a backup of my computer files on an external hard drive three times but I get the same error message each time.


Kaspersky and Back up error access is denied (0x80070005)

The KIS personal firewall, like its competitiors, tend to block local NETBIOS ports which in turn cause Windows 7 (& Vista) system services to crash. jcgriff2

.
Does anyone know of a way round this problem thats more permenant than disabling Kaspersky for each backup? When I run an automated backup with Vista, I get the Back up error access is denied (0x80070005).

When complete - re-boot. I've looked into trying to deselect any Kaspersky files in AppData or elsewhere that might be getting backed up and causing Kaspersky problems, but there seems to be no advanced menu to pick and choose exact files and folders. The 0xc0000005 exception errors you are seeing in System Restore/ other backup is just the beginning. I'm running Windows Vista Home Premium SP2 32 Bit and Kaspersky 2010.

Un-install KIS using the KIS Removal Tool (KRT) - http://usa.kaspersky.com/support/home/208279463/

Download the KRT; save to desktop. If I temporarily disable Kaspersky then the backup will complete properly. Reset the Windows Firewall to its default settings -
START | type ffirewall.cpl | select "Restore Defaults"

I would recommend MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Regards. . .

Then go to desktop, RIGHT-click on the KRT icon and select Run as Administrator.


Error: 0x80070005 - Access denied , Backup Failed after SP-1 update

Ran sfc /scannow and also clean for both.. Did so and was able to complete a backup, tried re-enabling and again the backup failed.. Tried disabling all non-Microsoft services except for anti-virus and bluetooth (mouse is bluetooth) on one laptop and backup still failed with the same error..

Have never used it, backups have always been to the external drives (L: on one laptop and H: on the other). Ran chkdsk on both laptops and both external drives and no problems found.. Fails as below:

Error: 0x80070005 - Access denied

Both laptops were set to run backups once a week (since the external drives are not plugged in at all times)..

3 computers, desktop running Ultimate and backing up to AC-powered external drive and 2 laptops running Professional and back up to USB-powered external drives..

seems there must be another solution as backups were working just fine before SP-1. Backups set for full data and included system image for all 3.. now shows 262GB for the image and 151GB for the data and less than 50GB still free - had over 250GB free initially.... Do not really want to have to disable my anti-virus every time a backup is scheduled to run for both laptops...

the other drive is 320GB and also shows similar stats). Seems to get to approx 97% - 99% before it fails.. Have not changed the program I'm using, and its not causing backups to fail on the desktop computer (running the same program). I have also posted on the answers.microsoft forum an...


activation windows 7 fails with error 0x80070005

All with windows 7 professional x64. One of them fails to activate. We work with a windows 2008 SBE server domain
 - Activating online gives error 0x80070005.
- Closing the internet conenction and trying again gives me the option to activate through the phone method. We have about 10 pc's at the company.

Doing that gives the same error 0x80070005 "access denied".
 We have no firewall enabled.


Windows Update Error 0x80070005 Following Activation Work-Around

I've tried every fix I can find, including SFC Scannow and SubInAcl, without any joy. Can anyone suggest a remedy without me having to start again with a new full copy of Windows 7? Following installation, many updates, including SP1 were automatically added through Windows update.

I then came to Activating, and when it was refused, suddenly realised and remembered (after all these years) that I had in fact purchased a retail version of the Upgrade, and had originally installed it over the top of Vista. With this I successfully Activated. After searching Seven Forums I found and used the work-around binary file, provided on these forums for such a situation. Further investigation using the MS Fixit tool revealed the Error code 0x8007005, (Access Denied, as I've since found out).

Am I correct to assume this has been caused by my clean install of an upgrade version? I manually set it going, and it has just continued to search for updates for hours without anything else happening. After continuing to install s/w and generally set things up, I realised that Windows update was no longer running.


Windows Firewall service will not start, Error Code 5: Access Denied

When I try and start them manually in services.msc, it gives me Error Code 5: Access denied. I can not start Windows Firewall, Diagnostic Policy Service, Diagnostic Service Host, or Diagnostic System Host. Both BFE and Windows Firewall Authorization driver are running. Then go to services.msc and start up the BFE service .

Use Diagnose and fix Windows firewall service problem automatically -

Diagnose and fix Windows Firewall service problems automatically

OR

Go to BFE in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BFE

and then click on Add and typed in the space "Everyone" and save the changes. This is my first post, so I don't know if there is any other information that you need.

Hey guys,
I am running Windows 7 Home Premium 64bit.

If you need more information, please let me know. I am logged in as an administrator, and I have already allowed full control of these services for the Administrator accounts and the user "SYSTEM" in Regedit.


[SOLVED] Free File Sync/Windows Error Code 5, access denied

Permissions as far as i can tell are set to allow home groups, admins and all users. For my work i sync my files between the two over my home network using Free File Sync (ffs). For some reason ffs will sync across from my laptop to my desktop but not from my desktop to laptop.

But ffs still will only sync one way from my desktop to my laptop... All the sync settings are set to copy both ways, ffs is running as admin and i am the only user of both computers so they are both running as admin. I have set up homegroup between the two and i can easily copy any file type between both computers both ways.


Activation Error 0XC0000022 (Access Denied)

I tried the activate over the phone but I did not have the Installation ID.


After some issues with security after a recovery last week I did a clean install of my Windows 8 Pro X64 system. REG QUERY HKLM\SYSTEM\CurrentControlSet\services\spldr /S

REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SPLDR /S
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\Legacy_SLSVC
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\Legacy_SPPSVC

They may show something
Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. As usual MS support's response is the usual bull poo "refresh", or "reset", or "clean install", despite the fact that I had just performed a clean install, or "re-install Win7 and upgrade again".

click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
(you'll have to adjust the instructions for Win8 - but it's fairly close!)

EDIT: I did run SLUI 3 and 4 from an elevated command prompt. I now get the Windows Activation Windows popping up periodically but when I try to activate I receive an error code 0XC0000022. (Pic attached).

Accept the UAC prompt.
2) To run the commands easi...


0x80070005: Access is denied

I am an administrator on this PC, and I have no firewall or anti-virus software enabled. Can someone help me? you could try using this You may receive an, but I don't know if that will help

I have been attempting to enable the "Function Discovery Resource Publication" service but am getting this error when I try to start it.



LATEST TIP: You should click here to fix Windows errors and optimize system speed.



Recommended Links:

(1) Download (Windows activation providing error code 0x80070005 (Access is denied)) repair utility.

(2) Windows activation providing error code 0x80070005 (Access is denied)

(3) activation windows 7 ultimate error code 0x80070005

(4) windows start-up error re: windows product activation. error code 0x80070005

(5) ipersistfile :: save failed code 0x80070005 access is denied

 
Note: Manual troubleshooting of Windows activation providing error code 0x80070005 (Access is denied) is only recommended for advanced computer users.Download this automatic repair tool instead.